OUR EASY TO USE PATENTED MECHANICALLY FASTENED SYSTEM
THE BEAUTY OF STONE FOR SIGNIFICANTLY LESS
A LIFETIME OF EFFORTLESS BEAUTY
ADD VALUE TO YOUR HOME FOR LESS MONEY
WHAT YOU’LL NEED
Fusion Stone is an easy and budget-friendly way to beautifully upgrade your home, inside and out.
With just a few basic tools your average home handyperson is transformed into a Fusion Stone expert!
TAPE MEASURE
LEVEL
POWER DRILL
BIT INCLUDED
GRINDER WITH
MASONRY BLADE
FOUR EASY TO INSTALL STEPS
STEP ONE
Prepare Your Surface
Fusion Stone is installed over a Plywood or OSB substrate. Ensure that the substrate has been covered in a code approved, breathable, weather resistant barrier. Not required on interior installations.
STEP TWO
Installing The Starter Strip
Starter Strips are used at the base of all jobs as well as above any openings (windows and doors). Level and install the Starter Strips using the stainless-steel screws provided.
STEP THREE
Installing Fusion Corners
Begin installing Fusion Stone at the corner. As you build the corner ensure that you alternate short and long sides.
STEP FOUR
Complete Installing Stone
Continue to lay the stone until your installation is complete by following our detailed instructions.
